概述
如今客戶對產品質量要求日之趨高，除了要求對色準，外觀平整外，尤其在手感方面要求越來越高。往往因手感達不到要求而重做的，從而導致時間和精力的嚴重浪費。本公司的小軋車剛好可以很好的解決這個問題，可利于貴司模擬現場條件制做高度再現性的正確手感樣布爭取更好的商機。
General
Nowadays , customers ask for more requirements about product quality :not
only the requirement of color and smooth surfaces, but also comfortable feel.
Some work should be redone because of bad touching, which in turn , results in
serious waste of time and energy. The small padder manufactured by our company
is an ideal solution to this problem . Excellent and comfortable touching can be
reached with the on spot simulating in your company so as to create more and
better business opportunities for you !
用途
可調整到與現場一致的壓吸率，可提供的壓染或樹脂配方。
可利用此機，選擇整理助劑濃度的品質好壞．適用于染整廠、助劑、顏料制造廠。
Application
Adjustable to pressed absorbing rate on spot and provide precise pressed
dyeing or resin prescription.
Select the concentration quality of auxiliary ,which is applicable for
dyeing and finishing plant , manufacturer of auxiliary and dye .
特點
以壓縮空氣推動氣缸．使壓力均衡，且經久使用后，壓力的再現性良好。
羅拉目前的使用硬度72度，壓吸率在45%-90%之間適用布范圍廣，應用廣泛。
小軋車要比同行業安全性能佳，馬達轉動加裝正反轉功能，轉動控制可用手動或腳動來互換控制，對操作者絕對安全．特殊裝置效率高又安全不會夾到手指。除主架外，其他均是不銹鋼制成。
Feature
To promote the membrane by compressing the air; make the pressure
balanced .The pressure reappearance is still in good working order
after long time using.
The hardness of roller is72degree and pressure-absorbing rate is from45%to90%.With better safety and reciprocal rotating of motor ,
the small padder can be operated either by hand or foot ,
which makes the operator much safer . The special device with
high efficiency is designed for safe operation and used to prevent
the finger to be clamped. All the other parts are made of stainless
steel except the framework .
規格
壓吸羅拉采用進口材料，外部被覆N，B，R，橡膠再加以精密研磨完成，硬度為邵氏72度。
橡膠羅拉直徑為130mm，長度為430mm。
采用3相370V電機轉動，轉速可調節。
左右壓力可獨立調整，壓力范圍0-7kg
二組壓力指示計
二組壓力調節閥
空壓機為選購設備
Specification
Pressure absorbing roller with 72 degree of hardness , is made of
imported materials and covered by N,B,R, and rubber ; then be abraded.
The diameter of rubber roller is 130mm and the length is 430mm.
The3 phase 370Vmotor rotation,speed adjustable.
Right and left pressure or independent adjustment with the pressure
range between 0~7kg.
Group two pressure indicating meter
Group two pressure adjustment valve
Air compressor is an optional equipment
